General Services Administration (GSA)

Contract Number: GS-35F-0226K 

Period Covered by Contract: February 4, 2015 – February 3, 2020 

For services offered through the U.S. General Services Administration. Download our pricelist here: https://www.gsaadvantage.gov/ref_text/GS35F0226K/0PPF3H.3BJ31A_GS-35F-0226K_ISSPRICELIST0115V4.PDF.

Intelligent Software Solutions, Inc. (ISS) provides IT professional services including program management, systems engineering, software engineering, systems analysis, programming, technical writing, web programming, advanced research support, and administrative support.

SIN 132-51 — INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES 

FPDS Code D302    IT Systems Development Services

FPDS Code D306   IT Systems Analysis Services

FPDS Code D307   Automated Information Systems Design and Integration Services

FPDS Code D308   Programming Services

FPDS Code D316    IT Network Management Services

FPDS Code D317    Automated News Services, Data Services, or Other Information Services

FPDS Code D399    Other Information Technology Services, Not Elsewhere Classified

Note 1

All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2

Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3

This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product. Under such circumstances the services must be performed by the publisher or manufacturer or one of their authorized agents.

Information for Ordering Activities

APPLICABLE TO ALL SPECIAL ITEM NUMBERS 

SPECIAL NOTICE TO AGENCIES: Small Business Participation 

SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage!® on-line shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA Advantage!® and the Federal Supply Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. Geographic Scope of Contract: 

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

[X] The Geographic Scope of Contract will be domestic and overseas delivery.

[  ] The Geographic Scope of Contract will be overseas delivery only.

[  ] The Geographic Scope of Contract will be domestic delivery only.

ISS will deliver products worldwide with transportation charges to be paid by the Government from point of exportation to destination outside of the United States.

2. Contractor’s Ordering Address and Payment Information: 

5450 Tech Center Drive Suite 400 | Colorado Springs, CO 80919 

Contractors are required to accept credit cards for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Credit cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number can be used by ordering activities to obtain technical and/or ordering assistance:

(719) 457-0690 

3. Liability for Injury or Damage 

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. Statistical Data for Government Ordering Office Completion of Standard Form 279: 

Block 9: G. Order/Modification Under Federal Schedule 

Block 16: Data Universal Numbering System (DUNS) Number: 96-351-9939 

Block 30: Type of Contractor: Large 

Block 31: Woman-Owned Small Business: No 

Block 36: Contractor’s Taxpayer Identification Number (TIN): 84-1432132 

4a. CAGE Code: 1CCC6 

4b. Contractor has registered with the Central Contractor Registration Database (SAM).

5. FOB Destination 

6. Delivery Schedule

a. Time of Delivery: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER: 132-51

DELIVERY TIME (Days ARO): As Negotiated with Individual Agencies

7. Discounts: Prices shown are NET Prices; Basic Discounts have been deducted. 

b. Urgent Requirements: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

a. Prompt Payment: None 

b. Quantity: None 

c. Dollar Volume: None

d. Government Educational Institutions are offered the same discounts as all other Government customers. 

e. Other: None 

8. Trade Agreements Act of 1979, as amended: 

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. Statement Concerning Availability of Export Packing: 

None 

10. Small Requirements: 

The minimum dollar value of orders to be issued is $100.00 

11. Maximum Order: (All dollar amounts are exclusive of any discount for prompt payment.) 

The Maximum Order value for SIN 132-51 is $500,000.

12. Use of Federal Supply Service Information Technology Schedule Contracts. In accordance with FAR 8.404: 

[NOTE: Special ordering procedures have been established for Special Item Number (SIN) 132-51 IT Professional Services; refer to the terms and conditions for that SIN.] 

Orders placed pursuant to a Multiple Award Schedule (MAS), using the procedures in FAR 8.404, are considered to be issued pursuant to full and open competition. Therefore, when placing orders under Federal Supply Schedules, ordering activities need not seek further competition, synopsize the requirement, make a separate determination of fair and reasonable pricing, or consider small business set-asides in accordance with subpart 19.5. GSA has already determined the prices of items under schedule contracts to be fair and reasonable. By placing an order against a schedule using the procedures outlined below, the ordering activity has concluded that the order represents the best value and results in the lowest overall cost alternative (considering price, special features, administrative costs, etc.) to meet the ordering activity’s needs.

a. Orders placed at or below the micro-purchase threshold. Ordering activities can place orders at or below the micro-purchase threshold with any Federal Supply Schedule Contractor.

b. Orders exceeding the micro-purchase threshold but not exceeding the maximum order threshold. Orders should be placed with the Schedule Contractor that can provide the supply or service that represents the best value. Before placing an order, ordering activities should consider reasonably available information about the supply or service offered under MAS contracts by using the “GSA Advantage!” on-line shopping service, or by reviewing the catalogs/pricelists of at least three Schedule Contractors and selecting the delivery and other options available under the schedule that meets the ordering activity’s needs. In selecting the supply or service representing the best value, the ordering activity may consider—

(1) Special features of the supply or service that are required in effective program performance and that are not provided by a comparable supply or service;

(2) Trade-in considerations;

(3) Probable life of the item selected as compared with that of a comparable item;

(4) Warranty considerations;

(5) Maintenance availability;

(6) Past performance; and

(7) Environmental and energy efficiency considerations.

c. Orders exceeding the maximum order threshold. Each schedule contract has an established maximum order threshold. This threshold represents the point where it is advantageous for the ordering activity to seek a price reduction. In addition to following the procedures in paragraph b, above, and before placing an order that exceeds the maximum order threshold, ordering activities shall—

Review additional Schedule Contractors’

(1) catalogs/pricelists or use the “GSA Advantage!” on-line shopping service;

(2) Based upon the initial evaluation, generally seek price reductions from the Schedule Contractor(s) appearing to provide the best value (considering price and other factors); and

(3) After price reductions have been sought, place the order with the Schedule Contractor that provides the best value and results in the lowest overall cost alternative. If further price reductions are not offered, an order may still be placed, if the ordering activity determines that it is appropriate.

NOTE: For orders exceeding the maximum order threshold, the Contractor may:

(1) Offer a new lower price for this requirement (the Price Reductions clause is not applicable to orders placed over the maximum order in FAR 52.216-19 Order Limitations);

(2) Offer the lowest price available under the contract; or

(3) Decline the order (orders must be returned in accordance with FAR 52.216-19).

d. Blanket purchase agreements (BPAs). The establishment of Federal Supply Schedule BPAs is permitted when following the ordering procedures in FAR 8.404. All schedule contracts contain BPA provisions. Ordering activities may use BPAs to establish accounts with Contractors to fill recurring requirements. BPAs should address the frequency of ordering and invoicing, discounts, and delivery locations and times.

e. Price reductions. In addition to the circumstances outlined in paragraph c, above, there may be instances when ordering activities will find it advantageous to request a price reduction. For example, when the ordering activity finds a schedule supply or service elsewhere at a lower price or when a BPA is being established to fill recurring requirements, requesting a price reduction could be advantageous. The potential volume of orders under these agreements, regardless of the size of the individual order, may offer the ordering activity the opportunity to secure greater discounts. Schedule Contractors are not required to pass on to all schedule users a price reduction extended only to an individual ordering activity for a specific order.

f. Small business. For orders exceeding the micro-purchase threshold, ordering activities should give preference to the items of small business concerns when two or more items at the same delivered price will satisfy the requirement.

g. Documentation. Orders should be documented, at a minimum, by identifying the Contractor the item was purchased from, the item purchased, and the amount paid. If an ordering activity requirement in excess of the micro-purchase threshold is defined so as to require a particular brand name, product, or feature of a product peculiar to one manufacturer, thereby precluding consideration of a product manufactured by another company, the ordering activity shall include an explanation in the file as to why the particular brand name, product, or feature is essential to satisfy the ordering activity’s needs.

13. Federal Information Technology/Telecommunication Standards Requirements: 

Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 Federal Information Processing Standards Publications (FIPS PUBS): 

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable “FIPS Publication.” Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 Federal Telecommunication Standards (FED-STDS): 

Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable “FED-STD.” Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202) 619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301) 975-2833.

14. Contractor Tasks/Special Requirements (C-FSS-370) (Nov 2001) 

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. The Industrial Funding Fee does NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

15. Contract Administration for Ordering Activities: 

Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the Ordering Activity’s convenience, and (m) Termination for Cause (See C.1.)

16. GSA Advantage! 

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors’ schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer’s Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: Netscape). The Internet address is http://www.fss.gsa.gov/.

17. Purchase of Open Market Items 

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated at open market purchases. Ordering Activities procuring open market items must follow FAR 8.401(d).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS)—referred to as open market items—to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if—

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. Contractor Commitments, Warranties and Representations 

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. Overseas Activities 

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia.

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor’s technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. Blanket Purchase Agreements (BPAs) 

Federal Acquisition Regulation (FAR) 13.303-1(a) defines Blanket Purchase Agreements (BPAs) as “…a simplified method of filling anticipated repetitive needs for supplies or services by establishing ‘charge accounts’ with qualified sources of supply.” The use of Blanket Purchase Agreements under the Federal Supply Schedule Program is authorized in accordance with FAR 13.303-2(c)(3), which reads, in part, as follows:

“BPAs may be established with Federal Supply Schedule Contractors, if not inconsistent with the terms of the applicable schedule contract.”

Federal Supply Schedule contracts contain BPA provisions to enable schedule users to maximize their administrative and purchasing savings. This feature permits schedule users to set up “accounts” with Schedule Contractors to fill recurring requirements. These accounts establish a period for the BPA and generally address issues such as the frequency of ordering and invoicing, authorized callers, discounts, delivery locations and times. Agencies may qualify for the best quantity/volume discounts available under the contract, based on the potential volume of business that may be generated through such an agreement, regardless of the size of the individual orders. In addition, agencies may be able to secure a discount higher than that available in the contract based on the aggregate volume of business possible under a BPA. Finally, Contractors may be open to a progressive type of discounting where the discount would increase once the sales accumulated under the BPA reach certain prescribed levels. Use of a BPA may be particularly useful with the new Maximum Order feature. See the Suggested Format, contained in this Schedule Pricelist, for customers to consider when using this purchasing tool.

21. Contractor Team Arrangements 

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Contractor’s Reports of Sales and 552.238-76, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. Installation, Deinstallation, Reinstallation 

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act apply.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8.

23. Section 508 Compliance 

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following: https://www.issinc.com/

The EIT standard can be found at: www.Section508.gov/.

24. Prime Contractor Ordering from Federal Supply Schedules 

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement: This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. Insurance—Work on a Government Installation (Jan 1997)(FAR 52.228-5) 

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government’s interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the General Purpose Information Technology Equipment, Software, and Services Contract Number GS-35F-0226K.

Terms and Conditions Applicable to Information Technology Professional Services (Special Item Number 132-51)

1. Scope 

a. The prices, terms and conditions stated under Special Item Number 132-51 Information Technology Professional Services apply exclusively to IT Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. Performance Incentives 

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract in accordance with this clause.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. Ordering Procedures for Services (Requiring a Statement of Work) (G-FCI-920) (Mar 2003) 

FAR 8.402 contemplates that GSA may occasionally find it necessary to establish special ordering procedures for individual Federal Supply Schedules or for some Special Item Numbers (SINs) within a Schedule. GSA has established special ordering procedures for services that require a Statement of Work. These special ordering procedures take precedence over the procedures in FAR 8.404 (b)(2) through (b)(3).

When ordering services over $100,000, Department of Defense (DOD) ordering offices and non-DOD agencies placing orders on behalf of the DOD must follow the policies and procedures in the Defense Federal Acquisition Regulation Supplement (DFARS) 208.404-70 – Additional ordering procedures for services. When DFARS 208.404-70 is applicable and there is a conflict between the ordering procedures contained in this clause and the additional ordering procedures for services in DFARS 208.404-70, the DFARS procedures take precedence.

GSA has determined that the prices for services contained in the contractor’s price list applicable to this Schedule are fair and reasonable. However, the ordering activity using this contract is responsible for considering the level of effort and mix of labor proposed to perform a specific task being ordered and for making a determination that the total firm-fixed price or ceiling price is fair and reasonable.

(a) When ordering services, ordering activities shall—

(1) Prepare a Request (Request for Quote or other communication tool):

(i) A statement of work (a performance-based statement of work is preferred) that outlines, at a minimum, the work to be performed, location of work, period of performance, deliverable schedule, applicable standards, acceptance criteria, and any special requirements (i.e., security clearances, travel, special knowledge, etc.) should be prepared.

(ii) The request should include the statement of work and request the contractors to submit either a firm-fixed price or a ceiling price to provide the services outlined in the statement of work. A firm-fixed price order shall be requested, unless the ordering activity makes a determination that it is not possible at the time of placing the order to estimate accurately the extent or duration of the work or to anticipate cost with any reasonable degree of confidence. When such a determination is made, a labor hour or time-and-materials proposal may be requested. The firm-fixed price shall be based on the rates in the schedule contract and shall consider the mix of labor categories and level of effort required to perform the services described in the statement of work. The firm-fixed price of the order should also include any travel costs or other incidental costs related to performance of the services ordered, unless the order provides for reimbursement of travel costs at the rates provided in the Federal Travel or Joint Travel Regulations. A ceiling price must be established for labor-hour and time-and-materials orders.

(iii) The request may ask the contractors, if necessary or appropriate, to submit a project plan for performing the task, and information on the contractor’s experience and/or past performance performing similar tasks.

(iv) The request shall notify the contractors what basis will be used for selecting the contractor to receive the order. The notice shall include the basis for determining whether the contractors are technically qualified and provide an explanation regarding the intended use of any experience and/or past performance information in determining technical qualification of responses. If consideration will be limited to schedule contractors who are small business concerns as permitted by paragraph (2) below, the request shall notify the contractors that will be the case..

(2) Transmit the Request to Contractors:

Based upon an initial evaluation of catalogs and price lists, the ordering activity should identify the contractors that appear to offer the best value (considering the scope of services offered, pricing and other factors such as contractors’ locations, as appropriate) and transmit the request as follows:

NOTE: When buying IT professional services under SIN 132—51 ONLY, the ordering office, at its discretion, may limit consideration to those schedule contractors that are small business concerns. This limitation is not applicable when buying supplies and/or services under other SINs as well as SIN 132-51. The limitation may only be used when at least three (3) small businesses that appear to offer services that will meet the agency’s needs are available, if the order is estimated to exceed the micro-purchase threshold.

(i) The request should be provided to at least three (3) contractors if the proposed order is estimated to exceed the micro-purchase threshold, but not exceed the maximum order threshold.

(ii) For proposed orders exceeding the maximum order threshold, the request should be provided to additional contractors that offer services that will meet the ordering activity’s needs.

(iii) In addition, the request shall be provided to any contractor who specifically requests a copy of the request for the proposed order.

(iv) Ordering activities should strive to minimize the contractors’ costs associated with responding to requests for quotes for specific orders. Requests should be tailored to the minimum level necessary for adequate evaluation and selection for order placement. Oral presentations should be considered, when possible.

(3) Evaluate Responses and Select the Contractor to Receive the Order:

After responses have been evaluated against the factors identified in the request, the order should be placed with the schedule contractor that represents the best value. (See FAR 8.404)

(b) The establishment of Federal Supply Schedule Blanket Purchase Agreements (BPAs) for recurring services is permitted when the procedures outlined herein are followed. All BPAs for services must define the services that may be ordered under the BPA, along with delivery or performance time frames, billing procedures, etc. The potential volume of orders under BPAs, regardless of the size of individual orders, may offer the ordering activity the opportunity to secure volume discounts. When establishing BPAs, ordering activities shall–

(1) Inform contractors in the request (based on the ordering activity’s requirement) if a single BPA or multiple BPAs will be established, and indicate the basis that will be used for selecting the contractors to be awarded the BPAs.

(i) SINGLE BPA: Generally, a single BPA should be established when the ordering activity can define the tasks to be ordered under the BPA and establish a firm-fixed price or ceiling price for individual tasks or services to be ordered. When this occurs, authorized users may place the order directly under the established BPA when the need for service arises. The schedule contractor that represents the best value should be awarded the BPA. (See FAR 8.404)

(ii) MULTIPLE BPAs: When the ordering activity determines multiple BPAs are needed to meet its requirements, the ordering activity should determine which contractors can meet any technical qualifications before establishing the BPAs. When establishing the BPAs, the procedures in (a)(2) above must be followed. The procedures at (a)(2) do not apply to orders issued under multiple BPAs. Authorized users must transmit the request for quote for an order to all BPA holders and then place the order with the Schedule contractor that represents the best value.

(2) Review BPAs Periodically: Such reviews shall be conducted at least annually. The purpose of the review is to determine whether the BPA still represents the best value. (See FAR 8.404)

(c) The ordering activity should give preference to small business concerns when two or more contractors can provide the services at the same firm-fixed price or ceiling price.

(d) When the ordering activity’s requirement involves both products as well as executive, administrative and/or professional, services, the ordering activity should total the prices for the products and the firm-fixed price for the services and select the contractor that represents the best value. (See FAR 8.404)

(e) The ordering activity, at a minimum, should document orders by identifying the contractor from which the services were purchased, the services purchased, and the amount paid. If other than a firm-fixed price order is placed, such documentation should include the basis for the determination to use a labor-hour or time-and-materials order. For ordering activity requirements in excess of the micro-purchase threshold, the order file should document the evaluation of Schedule contractors’ quotes that formed the basis for the selection of the contractor that received the order and the rationale for any trade-offs made in making the selection.

4. Order 

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

5. Performance of Services 

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity.

c. The ordering activity should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of IT Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

6. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989) 

(a) The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

(b) If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the Contractor’s cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

(c) If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

(d) If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

7. Inspection of Services 

The Inspection of Services–Fixed Price (AUG 1996) clause at FAR 52.246-4 applies to firm-fixed price orders placed under this contract. The Inspection–Time-and-Materials and Labor-Hour (JAN 1986) clause at FAR 52.246-6 applies to time-and-materials and labor-hour orders placed under this contract.

8. Responsibilities of the Contractor 

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227-14 Rights in Data – General, may apply.

9. Responsibilities of the Ordering Activity 

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT Services.

10. Independent Contractor 

All IT Services performed by the Contractor under the terms of this contract shall be as an independent Contractor, and not as an agent or employee of the ordering activity.

11. Organizational Conflicts of Interest 

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

12. Invoices 

The Contractor, upon completion of the work ordered, shall submit invoices for IT services. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

13. Payments 

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the Payments under Time-and-Materials and Labor-Hour Contracts at FAR 52.232-7 (Dec 2002), (Alternate II – Feb 2002) (Deviation – May 2003) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and-Materials and Labor-Hour Contracts at FAR 52.232-7 (Dec 2002), (Alternate II – Feb 2002) (Deviation – May 2003) applies to labor-hour orders placed under this contract.

14. Résumés 

Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.

15. Incidental Support Costs 

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

16. Approval of Subcontracts 

The ordering activity may require that the Contractor receive, from the ordering activity’s Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

17. Description of IT Services And Pricing 

Please see the pricelist and description of services beginning on page 26. 

USA Commitment to Promote Small Business Participation Procurement Programs

PREAMBLE 

Intelligent Software Systems, Inc. (ISS) provides commercial products and services to ordering activities. We are committed to promoting participation of small, small disadvantaged and women-owned small businesses in our contracts. We pledge to provide opportunities to the small business community through reselling opportunities, mentor-protégé programs, joint ventures, teaming arrangements, and subcontracting.

COMMITMENT 

To actively seek and partner with small businesses.

To identify, qualify, mentor and develop small, small disadvantaged and women-owned small businesses by purchasing from these businesses whenever practical.

To develop and promote company policy initiatives that demonstrate our support for awarding contracts and subcontracts to small business concerns.

To undertake significant efforts to determine the potential of small, small disadvantaged and women-owned small business to supply products and services to our company.

To insure procurement opportunities are designed to permit the maximum possible participation of small, small disadvantaged, and women-owned small businesses.

To attend business opportunity workshops, minority business enterprise seminars, trade fairs, procurement conferences, etc., to identify and increase small businesses with whom to partner.

To publicize in our marketing publications our interest in meeting small businesses that may be interested in subcontracting opportunities.

We signify our commitment to work in partnership with small, small disadvantaged and women-owned small businesses to promote and increase their participation in ordering activity contracts. To accelerate potential opportunities please contact Virginia Cook at phone: 719-452-7351, fax: 719-452-7001, or email: virginia.cook@issinc.com.

Best Value Blanket Purchase Agreement Federal Supply Schedule

(Insert Customer Name)

In the spirit of the Federal Acquisition Streamlining Act ____(ordering activity)___ and Intelligent Software Solutions, Inc. (ISS) enter into a cooperative agreement to further reduce the administrative costs of acquiring commercial items from the General Services Administration (GSA) Federal Supply Schedule Contract GS-35F-0226K.

Federal Supply Schedule contract BPAs eliminate contracting and open market costs such as: search for sources; the development of technical documents, solicitations and the evaluation of offers. Teaming Arrangements are permitted with Federal Supply Schedule Contractors in accordance with Federal Acquisition Regulation (FAR) 9.6.

This BPA will further decrease costs, reduce paperwork, and save time by eliminating the need for repetitive, individual purchases from the schedule contract. The end result is to create a purchasing mechanism for the ordering activity that works better and costs less.

Signatures

ORDERING ACTIVITY   DATE                     CONTRACTOR    DATE

(CUSTOMER NAME) 

BLANKET PURCHASE AGREEMENT 

Pursuant to GSA Federal Supply Schedule Contract Number GS-35F-0226K, Blanket Purchase Agreements, ISS agrees to the following terms of a Blanket Purchase Agreement (BPA) EXCLUSIVELY WITH (Ordering Activity):

(1) The following contract items can be ordered under this BPA. All orders placed against this BPA are subject to the terms and conditions of the contract, except as noted below:

MODEL NUMBER/PART NUMBER *SPECIAL BPA DISCOUNT/PRICE 

(2) Delivery:

DESTINATION DELIVERY SCHEDULES/DATES 

(3) The ordering activity estimates, but does not guarantee, that the volume of purchases through this agreement will be ______________.

(4) This BPA does not obligate any funds.

(5) This BPA expires on _________________ or at the end of the contract period, whichever is earlier.

(6) The following office(s) is hereby authorized to place orders under this BPA:

OFFICE POINT OF CONTACT 

(7) Orders will be placed against this BPA via Electronic Data Interchange (EDI), FAX, or paper.

(8) Unless otherwise agreed to, all deliveries under this BPA must be accompanied by delivery tickets or sales slips that must contain the following information as a minimum:

(a) Name of Contractor;

(b) Contract Number;

(c) BPA Number;

(d) Model Number or National Stock Number (NSN);

(e) Purchase Order Number;

(f) Date of Purchase;

(g) Quantity, Unit Price, and Extension of Each Item (unit prices and extensions need not be shown when incompatible with the use of automated systems; provided, that the invoice is itemized to show the information); and

(h) Date of Shipment.

(9) The requirements of a proper invoice are specified in the Federal Supply Schedule contract. Invoices will be submitted to the address specified within the purchase order transmission issued against this BPA.

(10) The terms and conditions included in this BPA apply to all purchases made pursuant to it. In the event of an inconsistency between the provisions of this BPA and the Contractor’s invoice, the provisions of this BPA will take precedence.

Basic Guidelines for Using Contractor Team Arrangements

Federal Supply Schedule Contractors may use “Contractor Team Arrangements” (see FAR 9.6) to provide solutions when responding to ordering activity requirements.

These Team Arrangements can be included under a Blanket Purchase Agreement (BPA). BPAs are permitted under all Federal Supply Schedule contracts.

Orders under a Team Arrangement are subject to terms and conditions or the Federal Supply Schedule Contract.

Participation in a Team Arrangement is limited to Federal Supply Schedule Contractors.

Customers should refer to FAR 9.6 for specific details on Team Arrangements.

Here is a general outline on how it works:

  • The customer identifies their requirements.
  • Federal Supply Schedule Contractors may individually meet the customers needs, or –
  • Federal Supply Schedule Contractors may individually submit a Schedules “Team Solution” to meet the customer’s requirement.
  • Customers make a best value selection.

Pricelist

Sin 132-51 IT Labor Categories

1. SIN 132-51 IT LABOR CATEGORIES Labor Category  Hourly Rate 
Program Manager $178.65
Principal Engineer $178.65
Senior Architect 1 $183.61
Senior Systems Engineer 3 $141.87
Senior Systems Engineer 2 $160.85
Senior Systems Engineer 1 $134.35
Software Engineering Lead $114.08
Software Specialist 3 $116.95
Software Specialist 2 $85.94
Software Specialist 1 $78.91
Programmer 3 $62.19
Programmer 2 $63.13
Programmer 1 $53.65
Technical Writer 3 $117.52
Technical Writer 2 $97.77
Technical Writer 1 $88.58
Project Administrator $59.03
Senior Project Administrator $69.43
Web Programmer 3 $85.58
Web Programmer 2 $49.61
Systems Analyst 4 $135.69
Systems Analyst 3 $116.04
Systems Analyst 2 $105.05
Systems Analyst 1 $100.28
Research Scientist 2 $230.75
Research Scientist 1 $192.41
Database Administrator 2 $141.47
Database Administrator 1 $121.26
Subject Matter Expertise 2 $119.34
Subject Matter Expertise 1 $92.97
Intel Analyst 3 $121.26
Intel Analyst 2 $97.02
Intel Analyst 1 $72.76
Test Engineer 3 $92.97
Test Engineer 2 $74.03
Test Engineer 1 $59.55
Trainer 3 $109.14
Trainer 2 $92.97
Program Manager 

Minimum/General Experience: Ten (10) – fifteen (15) years extensive, specialized and recent experience in the specific technical area required for task order. Excellent verbal and written communication skills.

Functional Responsibility: Applies specialized knowledge to particular task. Must be able to communicate highly technical and specialized information to a variety of audiences orally and in writing. Provides the working level managerial support for the contract, and makes the day-to-day decisions for the project. Provides project goals, strategies, and overall work plans. Normally is final level of approval for company on technical issues. Performs work under broad direction concerning general project and business unit goals. Generally operates with wide latitude for unreviewed action or decision. Has full responsibility for all personnel assigned to project teams. Advises/assists employees in their activities in supporting delivery order requirements.

Minimum Education: Bachelor’s degree preferred in mathematics or computer science and six (6) years of specialized experience. Other degrees with applicable experience can be substituted.

Principal Engineer 

Minimum/General Experience: Ten (10) – fifteen (15) of experience in providing technical solutions for complex engineering studies, computer applications, or business operations. At least six (6) years technical lead experience on software projects. At least four (4) years of design experience using OOA/OOD techniques are critical.

Functional Responsibility: Provides specialized technical leadership and skill toward designing, developing, implementing, and supporting software projects. Supervises multi-disciplined team members. Typically uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management.

Minimum Education: Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted.

Senior Architect 1 

Minimum/General Experience: Fourteen (14) – eighteen (18) years of experience in providing technical solutions for complex engineering studies, computer applications, or business operations. At least four (4) years of design experience using OOA/OOD techniques are critical. Experience leading Java/C++ development efforts.

Functional Responsibility: Provides specialized skill toward designing, developing, implementing, and supporting software projects. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management.

Minimum Education: Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted

Senior Systems Engineer 3 

Minimum/General Experience: twelve (12) – sixteen (16) years of experience in providing technical solutions for complex engineering studies, computer applications, or business operations. At least four (4) years of design experience using OOA/OOD techniques are critical. Experience leading Java/C++ development efforts.

Functional Responsibility: Provides specialized skill toward designing, developing, implementing, and supporting software projects. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management.

Minimum Education: Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted.

Senior Systems Engineer 1 

Minimum/General Experience: Six (6) – ten (10) years of experience in providing technical solutions for complex engineering studies, computer applications, or business operations. Design experience using OOA/OOD techniques is important. Experience leading Java/C++ development efforts.

Functional Responsibility: Assists with specialized skill in designing, developing, implementing, and supporting software projects. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management.

Minimum Education: Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted.

Software Engineering Lead 

Minimum/General Experience: Six (6) – eight (8) years of experience in providing technical solutions for complex engineering studies, computer applications, or business operations. Design experience using OOA/OOD techniques is important. Experience leading Java/C++ development efforts.

Functional Responsibility: Assists with specialized skill in designing, developing, implementing, and supporting software projects. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management.

Minimum Education: Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted.

Software Specialist 3 

Minimum/General Experience: Four (4) – six (6) years of experience in providing technical solutions for complex engineering studies, computer applications, or business operations. Design experience using OOA/OOD techniques is important. Experience leading Java/C++ development efforts.

Functional Responsibility: Provides specialized skill in designing, developing, implementing, and supporting software projects. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management.

Minimum Education: Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted.

Software Specialist 2 

Minimum/General Experience: Two (2) – four (4) years of experience in providing technical solutions for complex engineering studies, computer applications, or business operations.

Functional Responsibility: Assists by utilizing specialized skill in designing, developing, implementing, and supporting software projects. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management.

Minimum Education: Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted.

Software Specialist 1 

Minimum/General Experience: One (1) – two (2) years of experience with knowledge of providing solutions for complex engineering studies, computer applications, or business operations.

Functional Responsibility: Assists by utilizing specialized skill in designing, developing, implementing, and supporting software projects. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management.

Minimum Education: Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted.

Programmer 3 

Minimum/General Experience: Three (3) – five (5) years experience. At least one (1) year specialized experience in supporting corporate or government work team(s) requiring specialized services/program support.

Functional Responsibility: Must have excellent verbal and written communication skills. Ability to work well with services personnel in wide variety of working environments.

Minimum Education: High school diploma or equivalent required. Associates degree is desirable. Must have experience in the field of computer science. Must be working toward Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted.

Programmer 2 

Minimum/General Experience: Two (2) – four (4) years experience. At least one (1) year specialized experience in supporting corporate or government work team(s) requiring specialized services/program support.

Functional Responsibility: Must have excellent verbal and written communication skills. Ability to work well with services personnel in wide variety of working environments.

Minimum Education: High school diploma or equivalent required. Associates degree is desirable. Must have experience in the field of computer science. Must be working toward Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted.

Programmer 1 

Minimum/General Experience: One (1) – two (2) years experience. At least one (1) year specialized experience in supporting corporate or government work team(s) requiring specialized services/program support.

Functional Responsibility: Must have excellent verbal and written communication skills. Ability to work well with services personnel in wide variety of working environments.

Minimum Education: High school diploma or equivalent required. Associates degree is desirable. Must have experience in the field of computer science. Must be working toward Bachelor’s degree in mathematics or computer science. Other degrees with applicable experience can be substituted.

Technical Writer 3 

Minimum/General Experience: Five (5) – Eight (8) years of work experience performing technical writing and editing functions.

Functional Responsibility: Develops, drafts, revises, and edits reports, articles, manuals, specifications, presentation materials, and other technical documents. Interprets information obtained through research or provided by technical specialists; applies knowledge of field-specific documentation content and format standards to prepare, edit, and publish technical materials.

Minimum Education: Bachelor’s degree in mathematics, computer science, English, journalism, or a related field. Other degrees with applicable experience can be substituted.

Technical Writer 2 

Minimum/General Experience: Three (3) – six (6) years of work experience performing technical writing and editing functions.

Functional Responsibility: Develops, drafts, revises, and edits reports, articles, manuals, specifications, presentation materials, and other technical documents. Interprets information obtained through research or provided by technical specialists; applies knowledge of field-specific documentation content and format standards to prepare, edit, and publish technical materials.

Minimum Education: Bachelor’s degree in mathematics, computer science, English, journalism, or a related field. Other degrees with applicable experience can be substituted.

Technical Writer 1 

Minimum/General Experience: Two (2) – four (4) years of work experience performing technical writing and editing functions.

Functional Responsibility: Develops, drafts, revises, and edits reports, articles, manuals, specifications, presentation materials, and other technical documents. Interprets information obtained through research or provided by technical specialists; applies knowledge of field-specific documentation content and format standards to prepare, edit, and publish technical materials.

Minimum Education: Bachelor’s degree in mathematics, computer science, English, journalism, or a related field. Other degrees with applicable experience can be substituted.

Project Administrator 

Minimum/General Experience: Two (2) – six (6) years of experience. Eighteen months of on-the-job experience. Proficient in PC-based systems. Proficient in selected application software packages such as Microsoft Office, LOTUS Smart Suite, Perfect Office, etc.

Functional Responsibility: Monitors, manages, and manipulates routine administrative computer operations such as word processing. Properly prepares, formats, and prints administrative correspondence. Conducts operator level computer configuration functions. Proofreads, edits, and corrects correspondence. Operates computer equipment. Operates basic telecommunications equipment, including telephones and facsimile machines. Operates basic office equipment, including reproduction machines and GBC binder systems. Must possess or be able to obtain security level requested per task order/delivery order.

Minimum Education: High school diploma or business school certification.

Senior Project Administrator 

Minimum/General Experience: Six (6) – ten (10) years of experience. Five years on-the-job experience. Proficient in PC-based systems. Proficient in selected application software packages such as Microsoft Office, QuickBooks, general bookkeeping, etc.

Functional Responsibility: Monitors, manages, and manipulates routine administrative computer operations such as word processing. Properly prepares, formats, and prints administrative correspondence. Conducts operator level computer configuration functions. Proofreads, edits, and corrects correspondence. Operates computer equipment. Operates basic telecommunications equipment, including telephones and facsimile machines. Operates basic office equipment, including reproduction machines and GBC binder systems. Must possess or be able to obtain security level requested per task order/delivery order.

Minimum Education: High school diploma or business school certification.

Web Programmer 3 

Minimum/General Experience: Two (2) – five (5) years experience. Proficient in web server development and web site design and development.

Functional Responsibility: Must have excellent verbal and written communication skills. Designs, develops, and maintains web pages using tools such as Java Server Pages, ASP, Java, Perl, Cold Fusion, HTML authoring suites, CGI, graphics production suites, etc.

Minimum Education: High school diploma or equivalent required. Associates degree is desirable. Other degrees with applicable experience can be substituted.

Web Programmer 2 

Minimum/General Experience: One (1) – three (3) years experience. Proficient in web site design and development.

Functional Responsibility: Must have excellent verbal and written communication skills. Designs, develops, and maintains web pages using tools such as Cold Fusion, HTML authoring suites, CGI, graphics production suites, etc.

Minimum Education: High school diploma or equivalent required. Associates degree is desirable. Other degrees with applicable experience can be substituted.

Systems Analyst 4 

Minimum/General Experience: Eight (8) – twelve (12) years of experience in related operations areas, computer applications, or business operations. At least four (4) years of expertise in the field (e.g. intelligence analysis, training, etc).

Functional Responsibility: Provides specialized skill in the analysis of problem areas and system requirements. Provides training, develops training packages, defines concepts of operations, etc. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management. Manages less experienced personnel.

Minimum Education: Bachelor’s degree. Other degrees with applicable experience can be substituted.

Systems Analyst 3 

Minimum/General Experience: Seven (7) – ten (10) years of experience in related operations areas, computer applications, or business operations. At least four (4) years of expertise in the field (e.g. intelligence analysis, training, etc).

Functional Responsibility: Provides specialized skill in the analysis of problem areas and system requirements. Provides training, develops training packages, defines concepts of operations, etc. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management. Manages less experienced personnel.

Minimum Education: Bachelor’s degree. Other degrees with applicable experience can be substituted.

Systems Analyst 2 

Minimum/General Experience: Five (5) – eight (8) years of experience in related operations areas, computer applications, or business operations. At least four (4) years of expertise in the field (e.g. intelligence analysis, training, etc).

Functional Responsibility: Provides specialized skill in the analysis of problem areas and system requirements. Provides training, develops training packages, defines concepts of operations, etc. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management.

Minimum Education: Bachelor’s degree. Other degrees with applicable experience can be substituted.

Systems Analyst 1 

Minimum/General Experience: Four (4) – six (6) years of experience in related operations areas, computer applications, or business operations. At least two (2) years of expertise in the field (e.g. intelligence analysis, training, etc).

Functional Responsibility: Provides specialized skill in the analysis of problem areas and system requirements. Provides training, develops training packages, defines concepts of operations, etc. Uses prescribed methods, performs specific and limited portions of broader assignments, normally under the direction of experienced management.

Minimum Education: Bachelor’s degree. Other degrees with applicable experience can be substituted.

Research Scientist 2 

Minimum/General Experience: Considered an expert with over twenty (20) years of experience in systems analysis, physics, computer science, engineering, or mathematics.

Functional Responsibility: Assists customers in developing programs, analyzing requirements, and researching innovative approaches to complex problems. Provides specialized knowledge of complex customer processes and requirements. Applies advanced technical and managerial expertise to assist in analyzing, validating, and documenting complex operating environments, technology, and engineering practices.

Minimum Education: Ph.D. degree in applicable technical field. Other degrees with applicable experience can be substituted.

Intel Analyst 3 

Minimum General Experience: Requires Bachelor’s Degree and 10-15 years of experience in system analysis and/or application-specific operations.

Functional Responsibility: Coordinates and participates in the analysis, processing, and distribution of strategic and tactical intelligence; solves difficult technical problems. Specific duties include: preparing all-source intelligence products; assists in establishing and maintaining systematic, cross-referenced intelligence records and files; receives and processes reports and messages; assists in determining the significance and reliability of incoming information; assists in the analysis and evaluation of intelligence holdings to determine changes in an adversaries capabilities, vulnerabilities and probable courses of action. May lead small team and/or activities for a specific program task. Operates under general supervision.

Minimum Education: Bachelor’s Degree

Intel Analyst 2 

Minimum General Experience: Requires Bachelor’s Degree and 8-12 years of experience in system analysis and/or application-specific operations.

Functional Responsibility: Coordinates and participates in the analysis, processing, and distribution of strategic and tactical intelligence; solves difficult technical problems. Specific duties include: preparing all-source intelligence products; assists in establishing and maintaining systematic, cross-referenced intelligence records and files; receives and processes reports and messages; assists in determining the significance and reliability of incoming information; assists in the analysis and evaluation of intelligence holdings to determine changes in an adversaries capabilities, vulnerabilities and probable courses of action. Coordinates and participates in the analysis, processing, and distribution of strategic and tactical intelligence; solves difficult technical problems. Specific duties include: preparing all-source intelligence products; assists in establishing and maintaining systematic, cross-referenced intelligence records and files; receives and processes reports and messages; assists in determining the significance and reliability of incoming information; assists in the analysis and evaluation of intelligence holdings to determine changes in an adversaries capabilities, vulnerabilities and probable courses of action. May lead small team and/or activities for a specific program task. Operates under general supervision.

Minimum Education: Bachelor’s Degree

Intel Analyst 1 

Minimum General Experience: Requires Bachelor’s Degree and 4-8 years of experience in system analysis and/or application-specific operations.

Functional Responsibility: Coordinates and participates in the analysis, processing, and distribution of strategic and tactical intelligence; solves difficult technical problems. Specific duties include: preparing all-source intelligence products; assists in establishing and maintaining systematic, cross-referenced intelligence records and files; receives and processes reports and messages; assists in determining the significance and reliability of incoming information; assists in the analysis and evaluation of intelligence holdings to determine changes in an adversaries capabilities, vulnerabilities and probable courses of action. Coordinates and participates in the analysis, processing, and distribution of strategic and tactical intelligence; solves difficult technical problems. Specific duties include: preparing all-source intelligence products; assists in establishing and maintaining systematic, cross-referenced intelligence records and files; receives and processes reports and messages; assists in determining the significance and reliability of incoming information; assists in the analysis and evaluation of intelligence holdings to determine changes in an adversaries capabilities, vulnerabilities and probable courses of action. Operates under general supervision.

Minimum Education: Bachelor’s Degree

Test Engineer 3 

Minimum General Experience: Requires a Bachelors of Science Degree and 12+ years of experience in development, research, or product testing.

Functional Responsibility: Performs complex testing tasks requiring planning, scheduling, and testing to assure that developed products meet design specifications and are within total quality management limits and standards. Will have technical leadership responsibility for Test activities on a specific core technology area, program or project. Communicates with product developers and technical support specialists on product issues. Maintains the level of quality throughout the software life cycle. Conducts formal and informal reviews, at predetermined times, throughout the development life cycle. Provides technical and administrative guidance for personnel performing testing development tasks, including review of work products for accuracy, adherence to the design concept and to applicable standards, review of program documentation to assure compliance with customer standards/requirements, and for progress in accordance with schedules. Coordinates problem solution and user satisfaction. Mastery of multiple components within application core technology base. Operates under general supervision.

Minimum Education: Bachelor’s of Science Degree

Test Engineer 2 

Minimum General Experience: Requires a Bachelors of Science Degree and 4+ years of experience in development, research, or product testing.

Functional Responsibility: Performs testing tasks requiring planning, scheduling, and testing to assure that developed products meet design specifications and are within total quality management limits and standards. This includes assisting in developing test plans and procedures, executing tests, writing test reports and reviewing product documentation. Employs industry standard test methodologies in verification of system functionality. May have some technical leadership responsibility for test activities on a specific program or project. Communicates with product developers and technical support specialists on product issues. Operates under moderate supervision. Provides mentoring to entry level Testing personnel.

Minimum Education: Bachelor’s of Science Degree

Test Engineer 1 

Minimum General Experience: This is an entry-level position requiring a Bachelor’s of Science Degree and 0+ years of experience.

Functional Responsibility: Performs testing tasks to assure that developed products meet design specifications and are within total quality management limits and standards. This includes executing tests, writing test reports and reviewing product documentation. Communicates with product developers and technical support specialists on product issues. Operates under close supervision.

Minimum Education: Bachelor’s of Science Degree

Database Engineer 2 

Minimum General Experience: Requires Bachelor’s Degree in a technical discipline and 10-15 years of technical experience in product design and product support.

Functional Responsibility: Performs requirements analysis, product design, implementation, bug verification, release testing, and product support on software projects that may require research and analysis. Interacts with customers and end-users to develop use cases and analyze requirements. Knowledgeable in state-of-the-art design and development of technologies. May estimate software development cost and schedule, interpreting requirement and high-level design specifications. May supervise small team and/or lead the activities for a specific program task. Operates under general supervision

Minimum Education: Bachelor’s Degree

Database Engineer 1 

Minimum General Experience: Requires Bachelor’s Degree in a technical discipline and 7-12 years of technical experience in product design and product support.

Functional Responsibility: Performs requirements analysis, product design, implementation, bug verification, release testing, and product support on software projects that may require research and analysis. Interacts with customers and end-users to develop use cases and analyze requirements. Knowledgeable in state-of-the-art design and development of technologies. May estimate software development cost and schedule, interpreting requirement and high-level design specifications. May supervise small team and/or lead the activities for a specific program task. Operates under general supervision.

Minimum Education: Bachelor’s Degree

Subject Matter Expert 2 

Minimum General Experience: Requires Bachelor’s Degree and 10-15 years of experience in system analysis and/or application-specific operations.

Functional Responsibility: Performs analysis of complex problems, definition of functional requirements, operations research, modeling, and process analysis and design and develops and provides training materials. Conducts real-world analysis of the application of Company software products. Relevant experience includes, but is not limited to, extensive knowledge of analytical techniques, operational procedures and workflow, experience in gathering data to solve complex technical problems (e.g., requirements definition, operations research, modeling), and team leader responsibilities. Excellent written and oral skills required. May lead small team and/or activities for a specific program task. Operates under general supervision.

Minimum Education: Bachelor’s Degree

Subject Matter Expert 1 

Minimum General Experience: Requires Bachelor’s Degree and 8-12 years of experience in system analysis and/or application-specific operations.

Functional Responsibility: Performs analysis of complex problems, definition of functional requirements, operations research, modeling, and process analysis and design and develops and provides training materials. Conducts real-world analysis of the application of Company software products. Relevant experience includes, but is not limited to, extensive knowledge of analytical techniques, operational procedures and workflow, experience in gathering data to solve complex technical problems (e.g., requirements definition, operations research, modeling), and team leader responsibilities. Excellent written and oral skills required. Operates under general supervision.

Minimum Education: Bachelor’s Degree

Trainer 3 

Minimum General Experience: Shall have a BS Degree and seven (7) years of training experience in computer systems. Eight (8) years of additional experience may be substituted for the BS degree.

Functional Responsibility: Develops and revises training courses and prepare appropriate training materials. Prepares and modifies training materials. Trains personnel through formal classroom courses, workshops and seminars. Develops computer based training materials and courses. May lead small team and/or activities for a specific program task. Operates under general supervision.

Minimum Education: Bachelor of Science Degree or 20 years of related experience

Trainer 2 

Minimum General Experience: Shall have a BS Degree and seven (7) years of training experience in computer systems. Eight (8) years of additional experience may be substituted for the BS degree.

Functional Responsibility: Develops and revises training courses and prepare appropriate training materials. Prepares and modifies training materials. Trains personnel through formal classroom courses, workshops and seminars. Develops computer based training materials and courses. May lead small team and/or activities for a specific program task. Operates under general supervision.

Minimum Education: Bachelor of Science Degree or 15 years of training experience in computer systems.